IFM Patch cable: M12 Male Straight x DIN Form C Industrial, 2 ft Cable Lg, PUR
The IFM Patch cable is a DIN Form Industrial C solenoid connector with M12 cordsets, featuring an M12 male straight connector on one end and a DIN Form C industrial connector on the other. This 2-foot cable has a…
SKU 3G-OTH-47631
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The IFM Patch cable is a DIN Form Industrial C solenoid connector with M12 cordsets, featuring an M12 male straight connector on one end and a DIN Form C industrial connector on the other. This 2-foot cable has a black PUR jacket, 5 pins, and a wire size of 5.00 mm, with an IP67 rating (MPN E11437).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the IFM E11437 patch cable used for?
The IFM E11437 patch cable connects industrial sensors and actuators to control systems. It links an M12 male straight connector to a DIN Form C solenoid connector, making it suitable for factory automation, packaging, and material handling applications where reliable signal transmission is required.
What are the specifications of the IFM E11437 patch cable?
The IFM E11437 patch cable has a 2-foot length, black PUR jacket, 5 pins, and a wire size of 5.00 mm. It features an M12 male straight connector on one end and a DIN Form C industrial connector on the other, with an IP67 rating for dust and water ingress protection.
Where to buy the IFM E11437 patch cable worldwide?
You can source the IFM E11437 patch cable through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this IFM cable.
How to install the IFM E11437 patch cable?
To install the IFM E11437 patch cable, connect the M12 male straight plug to the sensor or actuator port and the DIN Form C connector to the solenoid valve. Ensure the connectors are fully seated and tightened by hand. Verify the IP67 seal is intact before use in wet environments.
Digunakan dalam
Aplikasi umum untuk IFMIFM Produk
3G Electric memasok IFM din form industrial c solenoid connector x m12 cordsets. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.











