IFM Patch cable: M12 Male Straight x DIN Form C Industrial, 5 m Cable Lg, PUR
The IFM Patch cable is a DIN Form Industrial C Solenoid Connector x M12 Cordsets, featuring an M12 Male Straight x DIN Form C Industrial configuration. It includes a 5 m PUR cable with a black jacket, 5 pins, and a…
SKU 3G-OTH-47688
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The IFM Patch cable is a DIN Form Industrial C Solenoid Connector x M12 Cordsets, featuring an M12 Male Straight x DIN Form C Industrial configuration. It includes a 5 m PUR cable with a black jacket, 5 pins, and a wire size of 5.00 mm, rated IP67. This product is identified by manufacturer part number E11440.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the IFM E11440 patch cable used for?
The IFM E11440 patch cable connects industrial sensors and actuators to control systems. Its M12 male straight connector and DIN Form C solenoid connector suit factory automation, packaging, and material handling applications where reliable signal transmission and IP67 protection are required.
What are the specifications of the IFM E11440 patch cable?
The IFM E11440 patch cable has an M12 male straight x DIN Form C Industrial configuration, 5 m PUR cable with black jacket, 5 pins, 5.00 mm wire size, and IP67 rating. It is manufactured by IFM under part number E11440.
Where to buy the IFM E11440 patch cable worldwide?
3G Electric supplies the IFM E11440 patch cable worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the IFM E11440 patch cable?
To install the IFM E11440 patch cable, connect the M12 male straight plug to the sensor or actuator port and the DIN Form C connector to the solenoid valve. Ensure both connectors are fully seated and tightened by hand to maintain the IP67 seal. Route the 5 m PUR cable away from heat sources and sharp edges.
Digunakan dalam
Aplikasi umum untuk IFMIFM Produk
3G Electric memasok IFM din form industrial c solenoid connector x m12 cordsets. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.











