Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Describe the job or paste specifications. Press Enter or Search.
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
LABCONCO Permukaan Kerja: 26 3/4 in Overall Wd, 4 ft Overall Lg, 1 in Tebal - Fume Hood Work Surfaces
LABCONCOFume Hood Work Surfaces

LABCONCO Permukaan Kerja: 26 3/4 in Overall Wd, 4 ft Overall Lg, 1 in Tebal

LABCONCO Work Surface adalah permukaan kerja fume hood berukuran 26 3/4 inci lebar keseluruhan dan 4 ft panjang keseluruhan dengan ketebalan 1 inci, terbuat dari material Epoxy. Produk ini dirancang khusus untuk…

SKU 3G-OTH-364137

Merek
LABCONCO
Item
Permukaan Kerja: 26 3/4 in Overall Wd, 4 ft Overall Lg, 1 in Tebal
Part Number
3908402
Kategori
Fume Hood Work Surfaces
Tersedia untuk Dipesan
Also known as:3908402LABCONCO
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

LABCONCO
Manufacturer Part Number
3908402
Material
Epoxy
For Use With
Purifier Non-Ventilated PCR Enclosures
Product Type
Fume Hood Work Surface
Includes Cup Sink Cut-Out
No Cup Sink Cut-Out

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

LABCONCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

LABCONCO Work Surface adalah permukaan kerja fume hood berukuran 26 3/4 inci lebar keseluruhan dan 4 ft panjang keseluruhan dengan ketebalan 1 inci, terbuat dari material Epoxy. Produk ini dirancang khusus untuk digunakan dengan Purifier Non-Ventilated PCR Enclosures dari LABCONCO. Dengan nomor bagian pabrikan 3908402, work surface ini tidak dilengkapi potongan cup sink, sehingga ideal untuk aplikasi laboratorium yang membutuhkan permukaan kerja yang kokoh dan tahan bahan kimia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi LABCONCO Work Surface 3908402?

LABCONCO Work Surface 3908402 memiliki dimensi lebar keseluruhan 26 3/4 inci, panjang keseluruhan 4 ft, dan ketebalan 1 inci. Materialnya adalah Epoxy dan dirancang untuk digunakan dengan Purifier Non-Ventilated PCR Enclosures. Produk ini tidak memiliki potongan cup sink.

Untuk apa LABCONCO Work Surface 3908402 digunakan?

LABCONCO Work Surface 3908402 digunakan sebagai permukaan kerja fume hood, khususnya untuk Purifier Non-Ventilated PCR Enclosures. Material Epoxy memberikan ketahanan terhadap bahan kimia dan panas, cocok untuk aplikasi laboratorium yang memerlukan permukaan kerja yang bersih dan tahan lama.

Di mana beli LABCONCO Work Surface 3908402 di Indonesia?

Anda dapat membeli LABCONCO Work Surface 3908402 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda dengan aman. Hubungi kami untuk minta penawaran.

Apakah LABCONCO Work Surface 3908402 memiliki potongan cup sink?

Tidak, LABCONCO Work Surface 3908402 tidak dilengkapi potongan cup sink (Includes Cup Sink Cut-Out: No Cup Sink Cut-Out). Permukaan kerja ini solid tanpa lubang, sehingga cocok untuk aplikasi yang memerlukan permukaan kerja yang utuh dan mudah dibersihkan.

Digunakan dalam

Aplikasi umum untuk LABCONCO
Forensic laboratories — LABCONCO Evidence Drying Cabinet with UV Light for drying and preserving evidence.
Pharmaceutical compounding — LABCONCO XPert Filtered Balance System for safe handling of bulk powders.
Biological research — LABCONCO Class II Type B2 Biosafety Cabinet for product and personnel protection.
Chemical fume hood maintenance — LABCONCO Flexible Circulation Tubing Kit for replacing neoprene tubing in exhaust systems.
Freeze drying operations — LABCONCO stainless steel chamber (MPN 7522800) as a replacement accessory for freeze dryers.
Laboratory hood installation — LABCONCO Lower Exhaust Transition Adapter for connecting fume hoods to ductwork.
Not sure this is the right part? Photo-identify it→

LABCONCO Produk

3G Electric memasok LABCONCO fume hood work surfaces. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari LABCONCO

Lihat semua LABCONCO suku cadang →
Epoxy fume hood work surface, 6 ft long by 1 1/4 in thick, with pre-drilled holes for venting and plumbing. Designed for use with Protector ClassMate laboratory hoods. No cup sink cut-out included
LABCONCO
Epoxy fume hood work surface, 6 ft long by 1 1/4 in thick, with pre-drilled holes for venting and plumbing. Designed for use with Protector ClassMate laboratory hoods. No cup sink cut-out included
This stainless steel work surface is designed for use with XPert Filtered Balance Stations. It provides a flat, corrosion-resistant platform for laboratory procedures. The surface measures 24 inches in overall length and 13/16 inches in thickness, with no cup sink cut-out
LABCONCO
This stainless steel work surface is designed for use with XPert Filtered Balance Stations. It provides a flat, corrosion-resistant platform for laboratory procedures. The surface measures 24 inches in overall length and 13/16 inches in thickness, with no cup sink cut-out
Epoxy fume hood work surface measuring 4 ft long by 1-1/4 in thick, with a left rear cup sink cut-out. Corrosion resistant for use in laboratory fume hoods, providing a durable bench area that withstands chemical exposure
LABCONCO
Epoxy fume hood work surface measuring 4 ft long by 1-1/4 in thick, with a left rear cup sink cut-out. Corrosion resistant for use in laboratory fume hoods, providing a durable bench area that withstands chemical exposure
This epoxy work surface is designed for use with XPert Filtered Balance Stations. It measures 6 ft in overall length, 1 in in thickness, and does not include a cup sink cut-out. The epoxy material provides a chemical-resistant platform for laboratory weighing and handling applications
LABCONCO
This epoxy work surface is designed for use with XPert Filtered Balance Stations. It measures 6 ft in overall length, 1 in in thickness, and does not include a cup sink cut-out. The epoxy material provides a chemical-resistant platform for laboratory weighing and handling applications
Epoxy fume hood work surface, 6 ft overall length, 1 1/4 in thick, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out on the right side. For use with Protector XL Laboratory Hoods
LABCONCO
Epoxy fume hood work surface, 6 ft overall length, 1 1/4 in thick, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out on the right side. For use with Protector XL Laboratory Hoods
This 1-inch-thick epoxy work surface is designed for use with Paramount Ductless Enclosures. It provides a chemical-resistant bench area for laboratory procedures, protecting the enclosure base from spills and corrosion. The surface measures 4 feet in length and does not include a cup sink cut-out
LABCONCO
This 1-inch-thick epoxy work surface is designed for use with Paramount Ductless Enclosures. It provides a chemical-resistant bench area for laboratory procedures, protecting the enclosure base from spills and corrosion. The surface measures 4 feet in length and does not include a cup sink cut-out
Epoxy work surface for fume hoods, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out at the right rear. Overall length 6 ft, width 30 in, thickness 1-1/4 in. For use with Protector Premier Laboratory Hoods
LABCONCO
Epoxy work surface for fume hoods, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out at the right rear. Overall length 6 ft, width 30 in, thickness 1-1/4 in. For use with Protector Premier Laboratory Hoods
Epoxy fume hood work surface with pre-drilled holes for venting and plumbing. Includes a cup sink cut-out on the right side. Designed for use with Protector Premier Laboratory Hoods. Overall length 8 ft, thickness 1 1/4 in
LABCONCO
Epoxy fume hood work surface with pre-drilled holes for venting and plumbing. Includes a cup sink cut-out on the right side. Designed for use with Protector Premier Laboratory Hoods. Overall length 8 ft, thickness 1 1/4 in

Ulasan pelanggan

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first