Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Describe the job or paste specifications. Press Enter or Search.
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
LABCONCO 4882804 Epoxy Fume Hood Work Surface for Basic 70 Hoods - Fume Hood Work Surfaces
LABCONCOFume Hood Work Surfaces

LABCONCO 4882804 Epoxy Fume Hood Work Surface for Basic 70 Hoods

LABCONCO Work Surface adalah permukaan kerja (fume hood work surface) yang dirancang khusus untuk Basic 70 Laboratory Hoods. Terbuat dari material Epoxy dengan dimensi lebar keseluruhan 30 in, panjang keseluruhan 6…

SKU 3G-OTH-364155

Merek
LABCONCO
Item
4882804 Epoxy Fume Hood Work Surface for Basic 70 Hoods
Part Number
4882804
Kategori
Fume Hood Work Surfaces
Tersedia untuk Dipesan
Also known as:4882804LABCONCO
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

LABCONCO
Manufacturer Part Number
4882804
Material
Epoxy
For Use With
Basic 70 Laboratory Hoods
Product Type
Fume Hood Work Surface
Includes Cup Sink Cut-Out
No Cup Sink Cut-Out

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

LABCONCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

LABCONCO Work Surface adalah permukaan kerja (fume hood work surface) yang dirancang khusus untuk Basic 70 Laboratory Hoods. Terbuat dari material Epoxy dengan dimensi lebar keseluruhan 30 in, panjang keseluruhan 6 ft, dan ketebalan 1 1/4 in. Produk ini tidak dilengkapi potongan wastafel (cup sink cut-out) dan memiliki nomor bagian pabrikan 4882804. Cocok untuk kebutuhan laboratorium industri di Indonesia yang memerlukan permukaan kerja tahan bahan kimia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi LABCONCO Work Surface 4882804?

LABCONCO Work Surface 4882804 memiliki dimensi lebar 30 in, panjang 6 ft, dan tebal 1 1/4 in. Materialnya Epoxy dan dirancang untuk Basic 70 Laboratory Hoods. Tidak termasuk potongan wastafel (cup sink cut-out).

Untuk apa LABCONCO Work Surface digunakan?

LABCONCO Work Surface digunakan sebagai permukaan kerja pada fume hood (lemari asam) laboratorium, khususnya Basic 70 Laboratory Hoods. Material Epoxy memberikan ketahanan terhadap bahan kimia dan panas, cocok untuk aplikasi laboratorium industri.

Di mana beli LABCONCO Work Surface di Indonesia?

Anda dapat membeli LABCONCO Work Surface 4882804 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Apakah LABCONCO Work Surface 4882804 memiliki potongan wastafel?

Tidak, LABCONCO Work Surface 4882804 tidak dilengkapi potongan wastafel (cup sink cut-out). Jika Anda memerlukan potongan wastafel, silakan hubungi kami untuk informasi lebih lanjut.

Digunakan dalam

Aplikasi umum untuk LABCONCO
Forensic laboratories — LABCONCO Evidence Drying Cabinet with UV Light for drying and preserving evidence.
Pharmaceutical compounding — LABCONCO XPert Filtered Balance System for safe handling of bulk powders.
Biological research — LABCONCO Class II Type B2 Biosafety Cabinet for product and personnel protection.
Chemical fume hood maintenance — LABCONCO Flexible Circulation Tubing Kit for replacing neoprene tubing in exhaust systems.
Freeze drying operations — LABCONCO stainless steel chamber (MPN 7522800) as a replacement accessory for freeze dryers.
Laboratory hood installation — LABCONCO Lower Exhaust Transition Adapter for connecting fume hoods to ductwork.
Not sure this is the right part? Photo-identify it→

LABCONCO Produk

3G Electric memasok LABCONCO fume hood work surfaces. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari LABCONCO

Lihat semua LABCONCO suku cadang →
Epoxy fume hood work surface, 6 ft long by 1 1/4 in thick, with pre-drilled holes for venting and plumbing. Designed for use with Protector ClassMate laboratory hoods. No cup sink cut-out included
LABCONCO
Epoxy fume hood work surface, 6 ft long by 1 1/4 in thick, with pre-drilled holes for venting and plumbing. Designed for use with Protector ClassMate laboratory hoods. No cup sink cut-out included
This stainless steel work surface is designed for use with XPert Filtered Balance Stations. It provides a flat, corrosion-resistant platform for laboratory procedures. The surface measures 24 inches in overall length and 13/16 inches in thickness, with no cup sink cut-out
LABCONCO
This stainless steel work surface is designed for use with XPert Filtered Balance Stations. It provides a flat, corrosion-resistant platform for laboratory procedures. The surface measures 24 inches in overall length and 13/16 inches in thickness, with no cup sink cut-out
Epoxy fume hood work surface measuring 4 ft long by 1-1/4 in thick, with a left rear cup sink cut-out. Corrosion resistant for use in laboratory fume hoods, providing a durable bench area that withstands chemical exposure
LABCONCO
Epoxy fume hood work surface measuring 4 ft long by 1-1/4 in thick, with a left rear cup sink cut-out. Corrosion resistant for use in laboratory fume hoods, providing a durable bench area that withstands chemical exposure
This epoxy work surface is designed for use with XPert Filtered Balance Stations. It measures 6 ft in overall length, 1 in in thickness, and does not include a cup sink cut-out. The epoxy material provides a chemical-resistant platform for laboratory weighing and handling applications
LABCONCO
This epoxy work surface is designed for use with XPert Filtered Balance Stations. It measures 6 ft in overall length, 1 in in thickness, and does not include a cup sink cut-out. The epoxy material provides a chemical-resistant platform for laboratory weighing and handling applications
Epoxy fume hood work surface, 6 ft overall length, 1 1/4 in thick, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out on the right side. For use with Protector XL Laboratory Hoods
LABCONCO
Epoxy fume hood work surface, 6 ft overall length, 1 1/4 in thick, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out on the right side. For use with Protector XL Laboratory Hoods
This 1-inch-thick epoxy work surface is designed for use with Paramount Ductless Enclosures. It provides a chemical-resistant bench area for laboratory procedures, protecting the enclosure base from spills and corrosion. The surface measures 4 feet in length and does not include a cup sink cut-out
LABCONCO
This 1-inch-thick epoxy work surface is designed for use with Paramount Ductless Enclosures. It provides a chemical-resistant bench area for laboratory procedures, protecting the enclosure base from spills and corrosion. The surface measures 4 feet in length and does not include a cup sink cut-out
Epoxy work surface for fume hoods, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out at the right rear. Overall length 6 ft, width 30 in, thickness 1-1/4 in. For use with Protector Premier Laboratory Hoods
LABCONCO
Epoxy work surface for fume hoods, dished and contoured to conform to the interior liner of laboratory hoods. Includes a cup sink cut-out at the right rear. Overall length 6 ft, width 30 in, thickness 1-1/4 in. For use with Protector Premier Laboratory Hoods
Epoxy fume hood work surface with pre-drilled holes for venting and plumbing. Includes a cup sink cut-out on the right side. Designed for use with Protector Premier Laboratory Hoods. Overall length 8 ft, thickness 1 1/4 in
LABCONCO
Epoxy fume hood work surface with pre-drilled holes for venting and plumbing. Includes a cup sink cut-out on the right side. Designed for use with Protector Premier Laboratory Hoods. Overall length 8 ft, thickness 1 1/4 in

Ulasan pelanggan

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first