MACURCO Calibration Gas: CM-12/CM-6, Air, Cylinder, 34 L Cylinder Capacity
The MACURCO Calibration Gas (SKU 817GK6, MPN 37-0081-4134-1) is a 34 L cylinder of air with 200 ppm carbon monoxide, designed for use with the CM-12 fixed gas detector. This calibration gas enables accurate sensor…
SKU 3G-OTH-551855
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MACURCO Calibration Gas (SKU 817GK6, MPN 37-0081-4134-1) is a 34 L cylinder of air with 200 ppm carbon monoxide, designed for use with the CM-12 fixed gas detector. This calibration gas enables accurate sensor verification and compliance testing for carbon monoxide detection systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is MACURCO calibration gas used for?
MACURCO calibration gas is used to verify and calibrate carbon monoxide detectors, specifically the CM-12 fixed gas detector. It contains 200 ppm carbon monoxide in air, ensuring accurate sensor performance and compliance with safety testing protocols in industrial environments.
What are the specifications of MACURCO calibration gas 37-0081-4134-1?
This MACURCO calibration gas (MPN 37-0081-4134-1) is a 34 L cylinder with a background gas of air and a gas mixture of carbon monoxide at 200 ppm. It is designed for use with the CM-12 fixed gas detector and is classified as a calibration gas for fixed gas detectors.
Where to buy MACURCO calibration gas worldwide?
3G Electric supplies MACURCO calibration gas worldwide, handling full logistics and customs clearance for international delivery. As a global industrial solutions provider, we source and deliver this 34 L cylinder of 200 ppm carbon monoxide in air for CM-12 detectors to any location.
How to use MACURCO calibration gas with CM-12?
To use MACURCO calibration gas with the CM-12 detector, attach the regulator to the 34 L cylinder containing 200 ppm carbon monoxide in air. Follow the detector's manual to initiate calibration mode, apply the gas at the specified flow rate, and verify the reading matches the certified concentration.
Digunakan dalam
Aplikasi umum untuk MACURCOMACURCO Produk
3G Electric memasok MACURCO calibration gases for fixed gas detectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
