MEM-CO Barbed Fitting Elbow: 1/4 in Pipe x 1/4 in ID Size, FBSPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/4 in pipe x 1/4 in ID size, featuring an FBSPT x Barbed, Brass, Beaded Barb design (MPN 1/4BSPT-FLB6). 3G Electric interprets demand…
SKU 3G-OTH-476545
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/4 in pipe x 1/4 in ID size, featuring an FBSPT x Barbed, Brass, Beaded Barb design (MPN 1/4BSPT-FLB6). 3G Electric interprets demand and delivers this fitting across 14 industrial departments — and we supply far more than is listed — with specialist depth in combustion, pumps and controls as a trust anchor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 1/4 in ID tubing to a 1/4 in FBSPT threaded port in pneumatic, fluid, or low-pressure air systems. It is commonly used in industrial instrumentation, lubrication lines, and control panels across 14 departments 3G Electric supplies, including pneumatics and instrumentation.
What are the specifications of the MEM-CO 1/4BSPT-FLB6?
The MEM-CO 1/4BSPT-FLB6 is a brass barbed fitting elbow with a 1/4 in pipe thread (FBSPT) on one end and a 1/4 in ID beaded barb on the other. It is made of brass and designed for secure tube retention in low-pressure applications. 3G Electric sources this genuine MEM-CO part globally.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies the MEM-CO Barbed Fitting Elbow 1/4BSPT-FLB6 to worldwide locations. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order this brass fitting for your pneumatic or fluid system needs.
How to install a MEM-CO barbed fitting elbow?
To install the MEM-CO barbed fitting elbow, push the 1/4 in ID tubing firmly onto the beaded barb until seated. Apply thread sealant to the 1/4 in FBSPT male thread and tighten into the female port. Avoid over-torquing brass fittings. 3G Electric can advise on proper selection for your application.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
