TELEMECANIQUE SENSORS Water Pump Switch: Reverse, 10 psi – 45 psi, 1/4" FNPS
The TELEMECANIQUE SENSORS 9013FRG22J19P is a reverse-acting general purpose water pump switch with a diaphragm actuator. It features a 1/4" FNPS connection and a pressure range of 10 psi to 45 psi, with an ON/OFF…
SKU 3G-OTH-198704
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TELEMECANIQUE SENSORS 9013FRG22J19P is a reverse-acting general purpose water pump switch with a diaphragm actuator. It features a 1/4" FNPS connection and a pressure range of 10 psi to 45 psi, with an ON/OFF differential of 22 psi / 16 psi.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TELEMECANIQUE SENSORS 9013FRG22J19P water pump switch used for?
This reverse-acting general purpose water pump switch controls pump operation in water systems. It uses a diaphragm actuator to sense pressure and switches the pump on at 16 psi and off at 22 psi, within a 10 psi to 45 psi range. Common applications include irrigation, pressure boosting, and water transfer systems.
What are the specifications of the TELEMECANIQUE SENSORS 9013FRG22J19P?
The TELEMECANIQUE SENSORS 9013FRG22J19P is a reverse-acting water pump switch with a diaphragm actuator. It has a 1/4" FNPS connection, a pressure range of 10 psi to 45 psi, and an ON/OFF differential of 22 psi / 16 psi. The manufacturer part number is 9013FRG22J19P.
Where to buy the TELEMECANIQUE SENSORS 9013FRG22J19P worldwide?
3G Electric supplies the TELEMECANIQUE SENSORS 9013FRG22J19P worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install a TELEMECANIQUE SENSORS reverse-acting water pump switch?
Install the switch with the 1/4" FNPS connection to the pump discharge line. Ensure the diaphragm is not damaged and the pressure range (10 psi to 45 psi) matches your system. Wire according to the pump motor voltage. Adjust the ON/OFF differential (22 psi / 16 psi) using the set screw if needed. Always follow local electrical codes.
Digunakan dalam
Aplikasi umum untuk TELEMECANIQUE SENSORSTELEMECANIQUE SENSORS Produk
3G Electric memasok TELEMECANIQUE SENSORS general purpose water pump switches. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.













