TELEMECANIQUE SENSORS Water Pump Switch: Std, 5 psi – 65 psi, 1/4" FNPS
The TELEMECANIQUE SENSORS Water Pump Switch (MPN 9013FSG2J21U) is a general-purpose water pump switch with a diaphragm actuator and a 1/4" FNPS connection. It operates in a standard configuration with a pressure…
SKU 3G-OTH-198711
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TELEMECANIQUE SENSORS Water Pump Switch (MPN 9013FSG2J21U) is a general-purpose water pump switch with a diaphragm actuator and a 1/4" FNPS connection. It operates in a standard configuration with a pressure range of 5 psi to 65 psi and an ON/OFF differential of 30 psi/50 psi.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TELEMECANIQUE SENSORS 9013FSG2J21U water pump switch used for?
This general-purpose water pump switch controls pump operation based on water pressure. It is commonly used in residential and light commercial water systems to automatically start and stop the pump within a set pressure range, protecting the system from dry running or overpressure.
What are the specifications of the TELEMECANIQUE SENSORS 9013FSG2J21U?
The switch features a diaphragm actuator, a 1/4" FNPS connection, and a standard configuration. Its pressure range is 5 psi to 65 psi with an ON/OFF differential of 30 psi/50 psi. The manufacturer part number is 9013FSG2J21U from TELEMECANIQUE SENSORS.
Where to buy the TELEMECANIQUE SENSORS 9013FSG2J21U worldwide?
3G Electric supplies this TELEMECANIQUE SENSORS water pump switch worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install a TELEMECANIQUE SENSORS water pump switch?
Installation requires connecting the 1/4" FNPS port to the pump system, wiring the switch according to the manufacturer's diagram, and setting the cut-in and cut-out pressures. Always disconnect power before installation and follow local electrical codes. Consult a qualified technician if unsure.
Digunakan dalam
Aplikasi umum untuk TELEMECANIQUE SENSORSTELEMECANIQUE SENSORS Produk
3G Electric memasok TELEMECANIQUE SENSORS general purpose water pump switches. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
