TIMKEN Pillow Block Bearing: 1 5/8 in Bore, Cast Iron, Eccentric Collar
The TIMKEN RAK 1-5/8 is an inch-system low-base pillow block ball bearing with a 1 5/8 in bore, designed for industrial equipment. It features a cast iron housing with an eccentric collar and a 2 1/16 in shaft…
SKU 3G-OTH-105312
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN RAK 1-5/8 is an inch-system low-base pillow block ball bearing with a 1 5/8 in bore, designed for industrial equipment. It features a cast iron housing with an eccentric collar and a 2 1/16 in shaft height, secured by a 1/2 in mounting bolt. This unit is a direct replacement for the TIMKEN RAK 1-5/8 part number.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN RAK 1-5/8 pillow block bearing used for?
The TIMKEN RAK 1-5/8 is a low-base pillow block ball bearing used in industrial equipment to support rotating shafts. Its cast iron housing and eccentric collar provide secure shaft mounting, making it suitable for conveyors, fans, and material handling systems where inch-dimension components are required.
What are the specifications of the TIMKEN RAK 1-5/8?
The TIMKEN RAK 1-5/8 has a 1 5/8 in bore, a 2 1/16 in shaft height, and a 1/2 in mounting bolt size. It uses an inch system of measurement, features a cast iron housing with an eccentric collar, and is a direct replacement for the RAK 1-5/8 part number.
Where to buy TIMKEN RAK 1-5/8 worldwide?
3G Electric supplies the TIMKEN RAK 1-5/8 pillow block bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this inch-system bearing for your industrial application.
How to install the TIMKEN RAK 1-5/8 pillow block bearing?
To install the TIMKEN RAK 1-5/8, first align the shaft with the 1 5/8 in bore and secure the eccentric collar by rotating it in the shaft's rotation direction. Tighten the 1/2 in mounting bolts to the housing base. Ensure the shaft height of 2 1/16 in matches your equipment's centerline.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN low-base pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
