TIMKEN Pillow Block Bearing: 1 3/16 in Bore, Cast Iron, Set Screws
The TIMKEN SAS 1-3/16 is a general purpose pillow block ball bearing with a 1 3/16 in bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a mounting bolt size of 1/2 in and a…
SKU 3G-OTH-104689
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN SAS 1-3/16 is a general purpose pillow block ball bearing with a 1 3/16 in bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a mounting bolt size of 1/2 in and a shaft height of 1 43/64 in, as specified by the manufacturer part number.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN SAS 1-3/16 pillow block bearing used for?
The TIMKEN SAS 1-3/16 is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery. It is commonly applied in conveyors, fans, and material handling equipment where a 1 3/16 in bore and cast iron housing with set screw locking are required.
What are the specifications of the TIMKEN SAS 1-3/16?
The TIMKEN SAS 1-3/16 has a 1 3/16 in bore, cast iron housing with set screw locking, a shaft height of 1 43/64 in, and a mounting bolt size of 1/2 in. It uses the inch system of measurement and is identified by manufacturer part number SAS 1-3/16.
Where to buy the TIMKEN SAS 1-3/16 pillow block bearing worldwide?
3G Electric supplies the TIMKEN SAS 1-3/16 pillow block bearing to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this inch-system, cast iron bearing with set screw locking.
How to select the correct TIMKEN pillow block bearing for a shaft?
To select the correct TIMKEN pillow block bearing, match the bore size to your shaft diameter—here 1 3/16 in. Verify the shaft height (1 43/64 in) and mounting bolt size (1/2 in) fit your base. Ensure the housing material (cast iron) and locking method (set screws) suit your load and environment.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
