TIMKEN Pillow Block Bearing: 1 1/8 in Bore, Cast Iron, Set Screws
The TIMKEN SAS 1-1/8 is a general purpose pillow block ball bearing with a 1 1/8 in bore, constructed from cast iron and featuring set screws for shaft attachment. This inch-system unit has a shaft height of 1 43/64…
SKU 3G-OTH-110406
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN SAS 1-1/8 is a general purpose pillow block ball bearing with a 1 1/8 in bore, constructed from cast iron and featuring set screws for shaft attachment. This inch-system unit has a shaft height of 1 43/64 in and accommodates a 1/2 in mounting bolt size.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN SAS 1-1/8 pillow block bearing used for?
The TIMKEN SAS 1-1/8 is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery such as conveyors, fans, and pumps. Its cast iron housing and set screw locking provide reliable shaft mounting in moderate-load applications.
What are the specifications of the TIMKEN SAS 1-1/8 pillow block bearing?
The TIMKEN SAS 1-1/8 has a 1 1/8 in bore, a cast iron housing, and set screws for shaft attachment. It uses inch-system measurements, with a shaft height of 1 43/64 in and a mounting bolt size of 1/2 in. The manufacturer part number is SAS 1-1/8.
Where to buy the TIMKEN SAS 1-1/8 pillow block bearing worldwide?
3G Electric supplies the TIMKEN SAS 1-1/8 pillow block bearing worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this bearing for your application.
How to install the TIMKEN SAS 1-1/8 pillow block bearing?
To install the TIMKEN SAS 1-1/8, first align the housing on a flat surface and secure it with 1/2 in bolts. Insert the shaft through the bore and tighten the set screws evenly against the shaft. Ensure proper lubrication and shaft alignment before operation.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
