TIMKEN Pillow Block Bearing: 1 1/4 in Bore, Cast Iron, Set Screws, 1 7/8 in Shaft Ht
The TIMKEN Pillow Block Bearing is a general purpose pillow block ball bearing with a 1 1/4 in bore, designed for inch-system applications. It features a cast iron housing, set screw locking, a 1 7/8 in shaft height…
SKU 3G-OTH-113288
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Pillow Block Bearing is a general purpose pillow block ball bearing with a 1 1/4 in bore, designed for inch-system applications. It features a cast iron housing, set screw locking, a 1 7/8 in shaft height, and a maximum operating temperature of 200°F. The mounting bolt size is 1/2 in, and the manufacturer part number is SAS 1-1/4.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN SAS 1-1/4 pillow block bearing used for?
The TIMKEN SAS 1-1/4 is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery. Its cast iron housing and set screw locking suit conveyors, fans, and material handling equipment where inch-system components and moderate loads are common.
What are the specifications of the TIMKEN SAS 1-1/4 pillow block bearing?
The TIMKEN SAS 1-1/4 has a 1 1/4 in bore, cast iron housing with set screw locking, 1 7/8 in shaft height, and 1/2 in mounting bolt size. It operates up to 200°F and uses inch-system measurements. The manufacturer part number is SAS 1-1/4.
Where to buy the TIMKEN SAS 1-1/4 pillow block bearing worldwide?
3G Electric supplies the TIMKEN SAS 1-1/4 pillow block bearing worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your facility. Contact us for availability and lead time on this inch-system bearing.
How to install a TIMKEN pillow block bearing with set screw locking?
Align the bearing housing on a flat mounting surface and tighten the 1/2 in bolts. Slide the shaft through the bore, then tighten the set screws evenly against the shaft using a hex key. Ensure the shaft rotates freely and the bearing is not misaligned before full operation.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
