TIMKEN Pillow Block Bearing: 1 7/16 in Bore, Cast Iron, Set Screws
The TIMKEN SAS 1-7/16 is a general purpose pillow block ball bearing with a 1 7/16 in bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a 1 7/8 in shaft height and…
SKU 3G-OTH-105498
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN SAS 1-7/16 is a general purpose pillow block ball bearing with a 1 7/16 in bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a 1 7/8 in shaft height and accommodates a 1/2 in mounting bolt size.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN SAS 1-7/16 pillow block bearing used for?
The TIMKEN SAS 1-7/16 is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery. Its cast iron housing and set screw locking make it suitable for moderate-load applications like conveyors, fans, and material handling equipment across manufacturing and processing plants.
What are the specifications of the TIMKEN SAS 1-7/16?
The TIMKEN SAS 1-7/16 has a 1 7/16 in bore, cast iron housing with set screw locking, a 1 7/8 in shaft height, and accommodates a 1/2 in mounting bolt size. It is an inch-system unit, manufactured by TIMKEN, with part number SAS 1-7/16.
Where to buy the TIMKEN SAS 1-7/16 pillow block bearing worldwide?
3G Electric supplies the TIMKEN SAS 1-7/16 pillow block bearing to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this inch-system bearing.
How to install a TIMKEN pillow block bearing with set screws?
To install a TIMKEN pillow block bearing like the SAS 1-7/16, first ensure the shaft is clean and the housing base is level. Align the bearing with the shaft, tighten the mounting bolts to the recommended torque, then secure the set screws against the shaft. Always follow the manufacturer's installation guidelines for proper fit and alignment.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
