TIMKEN Pillow Block Bearing: 2 3/16 in Bore, Cast Iron, Set Screws
The TIMKEN SAS 2-3/16 is a general purpose pillow block ball bearing with a 2 3/16 in bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a mounting bolt size of 5/8 in and a…
SKU 3G-OTH-108859
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN SAS 2-3/16 is a general purpose pillow block ball bearing with a 2 3/16 in bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a mounting bolt size of 5/8 in and a shaft height of 2 1/2 in, as specified by the manufacturer part number.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN SAS 2-3/16 pillow block bearing used for?
The TIMKEN SAS 2-3/16 is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery such as conveyors, fans, and pumps. Its cast iron housing and set screw locking provide reliable shaft retention in moderate-load applications.
What are the specifications of the TIMKEN SAS 2-3/16 pillow block bearing?
The TIMKEN SAS 2-3/16 has a 2 3/16 in bore, cast iron housing with set screw locking, a shaft height of 2 1/2 in, and a mounting bolt size of 5/8 in. It uses the inch system of measurement and is identified by manufacturer part number SAS 2-3/16.
Where to buy the TIMKEN SAS 2-3/16 pillow block bearing worldwide?
You can source the TIMKEN SAS 2-3/16 pillow block bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring you receive the correct TIMKEN bearing for your application.
How to select the correct TIMKEN pillow block bearing for my shaft?
To select the correct TIMKEN pillow block bearing, match the bore size to your shaft diameter—here 2 3/16 in—and verify the shaft height (2 1/2 in) and mounting bolt size (5/8 in). Ensure the housing material (cast iron) and locking method (set screws) suit your load and environment.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
