TIMKEN Pillow Block Bearing: 1 3/8 in Bore, Cast Iron, Set Screws, 1 7/8 in Shaft Ht
The TIMKEN SAS 1-3/8 is a general purpose pillow block ball bearing with a 1 3/8 in bore, designed for inch-system applications. This cast-iron housed unit features set-screw locking and a 1 7/8 in shaft height, with…
SKU 3G-OTH-111429
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN SAS 1-3/8 is a general purpose pillow block ball bearing with a 1 3/8 in bore, designed for inch-system applications. This cast-iron housed unit features set-screw locking and a 1 7/8 in shaft height, with a maximum operating temperature of 200°F. It accommodates a 1/2 in mounting bolt size.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN SAS 1-3/8 pillow block bearing used for?
The TIMKEN SAS 1-3/8 is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery. It is suitable for inch-system applications such as conveyors, fans, and material handling equipment, where reliable shaft alignment and load support are required.
What are the specifications of the TIMKEN SAS 1-3/8 pillow block bearing?
The TIMKEN SAS 1-3/8 has a 1 3/8 in bore, cast iron housing with set-screw locking, a 1 7/8 in shaft height, and a maximum operating temperature of 200°F. It uses a 1/2 in mounting bolt size and is designed for inch-system measurements.
Where to buy the TIMKEN SAS 1-3/8 pillow block bearing worldwide?
You can source the TIMKEN SAS 1-3/8 pillow block bearing from 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time.
How to install the TIMKEN SAS 1-3/8 pillow block bearing?
To install the TIMKEN SAS 1-3/8, mount the bearing on a flat surface using 1/2 in bolts through the base slots. Align the shaft with the bore, tighten the set screws onto the shaft, and ensure the housing is level. Follow standard bearing installation practices for proper fit and alignment.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
