TIMKEN Pillow Block Bearing: 1/2 in Bore, Cast Iron, Set Screws, 1 11/64 in Shaft Ht
The TIMKEN Pillow Block Bearing is a general purpose ball bearing unit with a 1/2 in bore, designed for inch-system applications. This cast-iron housed bearing features set screw locking and a 1 11/64 in shaft…
SKU 3G-OTH-109307
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Pillow Block Bearing is a general purpose ball bearing unit with a 1/2 in bore, designed for inch-system applications. This cast-iron housed bearing features set screw locking and a 1 11/64 in shaft height, with a maximum operating temperature of 200°F. It requires a 3/8 in mounting bolt size and is identified by manufacturer part number SAS 1/2.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN SAS 1/2 pillow block bearing used for?
The TIMKEN SAS 1/2 is a general purpose pillow block bearing used to support rotating shafts in industrial machinery. It is suitable for light to moderate loads in conveyors, fans, and agricultural equipment, operating within inch-system applications up to 200°F.
What are the specifications of the TIMKEN SAS 1/2 pillow block bearing?
The TIMKEN SAS 1/2 has a 1/2 in bore, cast iron housing with set screw locking, a 1 11/64 in shaft height, and a 3/8 in mounting bolt size. It operates up to 200°F and uses inch-system measurements. The manufacturer part number is SAS 1/2.
Where to buy the TIMKEN SAS 1/2 pillow block bearing worldwide?
3G Electric supplies the TIMKEN SAS 1/2 pillow block bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the TIMKEN SAS 1/2 pillow block bearing?
Mount the bearing on a clean, flat surface using 3/8 in bolts. Align the shaft with the 1/2 in bore, tighten the set screws evenly, and ensure the shaft rotates freely. Do not exceed 200°F operating temperature. Follow TIMKEN's generic installation guidelines for best results.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
