TIMKEN Pillow Block Bearing: 5/8 in Bore, Cast Iron, Set Screws, 1 11/64 in Shaft Ht
The TIMKEN SAS 5/8 is a general purpose pillow block ball bearing with a 5/8 inch bore, designed for inch-system applications. This cast iron unit features set screw locking and a 1 11/64 inch shaft height, with a…
SKU 3G-OTH-111453
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN SAS 5/8 is a general purpose pillow block ball bearing with a 5/8 inch bore, designed for inch-system applications. This cast iron unit features set screw locking and a 1 11/64 inch shaft height, with a maximum operating temperature of 200°F. It accommodates a 3/8 inch mounting bolt size.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN SAS 5/8 pillow block bearing used for?
The TIMKEN SAS 5/8 is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery. It is ideal for inch-system applications such as conveyors, fans, and material handling equipment, providing reliable radial and thrust load support in moderate-duty environments.
What are the specifications of the TIMKEN SAS 5/8 pillow block bearing?
The TIMKEN SAS 5/8 has a 5/8 inch bore, cast iron housing with set screw locking, and a shaft height of 1 11/64 inches. It accommodates a 3/8 inch mounting bolt size, operates up to 200°F, and uses inch-system measurements. The manufacturer part number is SAS 5/8.
Where to buy the TIMKEN SAS 5/8 pillow block bearing worldwide?
You can source the TIMKEN SAS 5/8 pillow block bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the bearing reaches your facility reliably. Contact us for availability and lead time.
How to install the TIMKEN SAS 5/8 pillow block bearing?
To install the TIMKEN SAS 5/8, first mount the bearing on a flat surface using 3/8 inch bolts through the base slots. Align the shaft with the 5/8 inch bore, then tighten the set screws evenly to lock the shaft in place. Ensure the operating temperature stays below 200°F for optimal performance.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
