TIMKEN 2 Bolt Flange Bearing: Radial Ball, 1 1/8 in Bore, Cast Iron, Set Screws
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 1/8 in cylindrical bore, cast iron housing, and set screw locking. It uses NLGI #2 Equivalent lubricant and has a 7/16 in…
SKU 3G-OTH-120866
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 1/8 in cylindrical bore, cast iron housing, and set screw locking. It uses NLGI #2 Equivalent lubricant and has a 7/16 in mounting bolt size. This inch-system unit is identified by manufacturer part number SCJT 1-1/8.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 2 Bolt Flange Bearing used for?
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing used to support rotating shafts in industrial equipment such as conveyors, fans, and agricultural machinery. Its cast iron housing and set screw locking provide reliable shaft retention in moderate-load applications.
What are the specifications of the TIMKEN SCJT 1-1/8 bearing?
This TIMKEN bearing has a 1 1/8 in cylindrical bore, cast iron housing, and set screw locking. It uses NLGI #2 Equivalent lubricant, has a 7/16 in mounting bolt size, and follows the inch system of measurement. The manufacturer part number is SCJT 1-1/8.
Where to buy TIMKEN flange bearings worldwide?
You can source TIMKEN flange bearings through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on the SCJT 1-1/8 or other TIMKEN bearing models.
How to install a TIMKEN 2 Bolt Flange Bearing?
To install, first ensure the shaft is clean and the bearing bore is aligned. Slide the bearing onto the shaft, tighten the set screws evenly to lock the shaft, then bolt the flange to a flat mounting surface using 7/16 in bolts. Apply moderate torque per TIMKEN guidelines to avoid housing distortion.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
