TIMKEN 2 Bolt Flange Bearing: Radial Ball, 1 7/16 in Bore, Cast Iron, Set Screws
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 7/16 in cylindrical bore, cast iron housing, and set screw locking. It features a mounting bolt size of 1/2 in, uses NLGI #2…
SKU 3G-OTH-109406
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 7/16 in cylindrical bore, cast iron housing, and set screw locking. It features a mounting bolt size of 1/2 in, uses NLGI #2 Equivalent lubricant, and is manufactured under part number SCJT 1-7/16.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 2 Bolt Flange Bearing used for?
The TIMKEN 2 Bolt Flange Bearing is used to support rotating shafts in industrial equipment such as conveyors, fans, and material handling systems. Its cast iron housing and set screw locking provide secure mounting in applications requiring radial load support and moderate misalignment tolerance.
What are the specifications of the TIMKEN SCJT 1-7/16 flange bearing?
The TIMKEN SCJT 1-7/16 is a 2 bolt flange bearing with a 1 7/16 in cylindrical bore, cast iron housing, and set screw locking. It uses NLGI #2 Equivalent lubricant, has a mounting bolt size of 1/2 in, and is an inch-system general purpose radial ball bearing.
Where to buy TIMKEN flange bearings in worldwide?
You can source TIMKEN flange bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the SCJT 1-7/16 or other TIMKEN bearing models.
How to install a TIMKEN 2 Bolt Flange Bearing?
To install a TIMKEN 2 Bolt Flange Bearing, first clean the shaft and housing bore. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten the 1/2 in bolts evenly. Secure the shaft by tightening the set screws against the shaft using a hex key. Apply NLGI #2 grease if needed.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
