TIMKEN 2 Bolt Flange Bearing: Radial Ball, 5/8 in Bore, Cast Iron, Set Screws
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 5/8 in cylindrical bore. This inch-system unit features a cast iron housing, set screw locking, and a 3 55/64 in length. It is…
SKU 3G-OTH-107156
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 5/8 in cylindrical bore. This inch-system unit features a cast iron housing, set screw locking, and a 3 55/64 in length. It is lubricated with NLGI #2 equivalent grease and uses 3/8 in mounting bolts (MPN SCJT 5/8).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 2 Bolt Flange Bearing used for?
The TIMKEN 2 Bolt Flange Bearing supports rotating shafts in industrial machinery, conveyors, and material handling systems. Its compact flange-mount design allows direct bolting to a frame or wall, providing reliable radial load support in tight spaces.
What are the specifications of the TIMKEN SCJT 5/8 flange bearing?
This TIMKEN 2 Bolt Flange Bearing has a 5/8 in cylindrical bore, cast iron housing with set screw locking, and a 3 55/64 in length. It uses NLGI #2 equivalent grease and 3/8 in mounting bolts. The inch-system unit is part number SCJT 5/8.
Where to buy TIMKEN flange bearings worldwide?
3G Electric supplies TIMKEN flange bearings like the SCJT 5/8 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this general purpose flange-mount ball bearing.
How to install a TIMKEN 2 bolt flange bearing?
Mount the bearing on a clean, flat surface using 3/8 in bolts. Align the shaft with the 5/8 in bore, tighten set screws evenly to lock the shaft, and apply NLGI #2 grease per maintenance schedule. Avoid overtightening to prevent housing distortion.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
