TIMKEN Pillow Block Bearing: 1 1/4 in Bore, Cast Iron, Eccentric Collar, 1 7/8 in Shaft Ht
The TIMKEN VAS 1-1/4 is a general purpose pillow block ball bearing with a 1 1/4 in bore, designed for inch-system applications. It features a cast iron housing, an eccentric collar locking mechanism, and a 1 7/8 in…
SKU 3G-OTH-108657
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN VAS 1-1/4 is a general purpose pillow block ball bearing with a 1 1/4 in bore, designed for inch-system applications. It features a cast iron housing, an eccentric collar locking mechanism, and a 1 7/8 in shaft height. The mounting bolt size is 1/2 in.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN VAS 1-1/4 pillow block bearing used for?
The TIMKEN VAS 1-1/4 is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery. It is suitable for applications requiring inch-system dimensions, such as conveyors, fans, and material handling equipment, where reliable shaft support and alignment are needed.
What are the specifications of the TIMKEN VAS 1-1/4 pillow block bearing?
The TIMKEN VAS 1-1/4 has a 1 1/4 in bore, a cast iron housing, and an eccentric collar locking mechanism. It features a 1 7/8 in shaft height and a 1/2 in mounting bolt size. This inch-system bearing is designed for general purpose use and is manufactured by TIMKEN.
Where to buy the TIMKEN VAS 1-1/4 pillow block bearing worldwide?
You can source the TIMKEN VAS 1-1/4 pillow block bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this TIMKEN bearing.
How to install the TIMKEN VAS 1-1/4 pillow block bearing?
To install the TIMKEN VAS 1-1/4, first ensure the shaft is clean and the housing is properly aligned. Slide the bearing onto the shaft, then tighten the eccentric collar by rotating it in the direction of shaft rotation. Secure the housing to the mounting surface using 1/2 in bolts. Always follow TIMKEN's installation guidelines for best results.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
