TIMKEN Pillow Block Bearing: 2 11/16 in Bore, Cast Iron, Set Screws, 3 in Shaft Ht
The TIMKEN YAK 2-11/16 is an inch-system low-base pillow block ball bearing with a 2 11/16-inch bore, cast iron housing, and set-screw locking. It has a 3-inch shaft height, a maximum operating temperature of 200°F…
SKU 3G-OTH-105560
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN YAK 2-11/16 is an inch-system low-base pillow block ball bearing with a 2 11/16-inch bore, cast iron housing, and set-screw locking. It has a 3-inch shaft height, a maximum operating temperature of 200°F, and accepts a 3/4-inch mounting bolt.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN YAK 2-11/16 pillow block bearing used for?
The TIMKEN YAK 2-11/16 is a low-base pillow block ball bearing used in industrial power transmission systems to support rotating shafts. It is commonly applied in conveyors, fans, and material handling equipment where a compact, cast-iron housing and set-screw locking are required.
What are the specifications of the TIMKEN YAK 2-11/16?
The TIMKEN YAK 2-11/16 has a 2 11/16-inch bore, cast iron housing with set-screw locking, a 3-inch shaft height, and a maximum operating temperature of 200°F. It uses a 3/4-inch mounting bolt and is designed for inch-system applications.
Where to buy TIMKEN YAK 2-11/16 worldwide?
You can source the TIMKEN YAK 2-11/16 worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install a TIMKEN pillow block bearing?
To install a TIMKEN pillow block bearing, first ensure the shaft is clean and free of burrs. Slide the bearing onto the shaft, align the housing base with the mounting surface, and tighten the set screws evenly. Use a torque wrench on the 3/4-inch mounting bolts per manufacturer guidelines.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN low-base pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
