TIMKEN Pillow Block Bearing: 5/8 in Bore, Cast Iron, Set Screws, 1 1/16 in Shaft Ht
The TIMKEN YAK 5/8 is an inch-system low-base pillow block ball bearing with a 5/8 in bore, cast iron housing, and set-screw locking. It features a 1 1/16 in shaft height, a 3/8 in mounting bolt size, and a maximum…
SKU 3G-OTH-103086
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN YAK 5/8 is an inch-system low-base pillow block ball bearing with a 5/8 in bore, cast iron housing, and set-screw locking. It features a 1 1/16 in shaft height, a 3/8 in mounting bolt size, and a maximum operating temperature of 200°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN YAK 5/8 pillow block bearing used for?
The TIMKEN YAK 5/8 is a low-base pillow block ball bearing used to support rotating shafts in industrial machinery. Its cast iron housing and set-screw locking suit conveyors, fans, and light-duty power transmission systems where a compact, inch-dimensioned bearing is required.
What are the specifications of the TIMKEN YAK 5/8?
The TIMKEN YAK 5/8 has a 5/8 in bore, cast iron housing with set-screw locking, a 1 1/16 in shaft height, and a 3/8 in mounting bolt size. It is rated for a maximum operating temperature of 200°F and uses inch-system measurements.
Where to buy the TIMKEN YAK 5/8 worldwide?
3G Electric supplies the TIMKEN YAK 5/8 pillow block bearing to customers worldwide. We handle full logistics and customs clearance, ensuring delivery to your facility. Contact us for pricing and lead time on this inch-system low-base bearing.
How to install a TIMKEN YAK 5/8 pillow block bearing?
Mount the bearing on a clean, flat surface using 3/8 in bolts through the base slots. Align the shaft with the 5/8 in bore, then tighten the set screws evenly against the shaft. Do not exceed 200°F operating temperature. Lubricate per TIMKEN guidelines.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN low-base pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
