TIMKEN Pillow Block Bearing: 1 11/16 in Bore, Cast Iron, Set Screws
The TIMKEN Pillow Block Bearing is a general purpose ball bearing unit with a 1 11/16 in bore, designed for inch-system applications. This cast-iron housed bearing features set-screw locking and a 2 1/8 in shaft…
SKU 3G-OTH-114479
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Pillow Block Bearing is a general purpose ball bearing unit with a 1 11/16 in bore, designed for inch-system applications. This cast-iron housed bearing features set-screw locking and a 2 1/8 in shaft height, with a 1/2 in mounting bolt size (MPN YAS 1-11/16 SGT).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN YAS 1-11/16 SGT pillow block bearing used for?
The TIMKEN YAS 1-11/16 SGT is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery. It is suitable for applications requiring inch-system dimensions, such as conveyors, fans, and material handling equipment, where reliable shaft support and alignment are needed.
What are the specifications of the TIMKEN YAS 1-11/16 SGT pillow block bearing?
The TIMKEN YAS 1-11/16 SGT has a 1 11/16 in bore, cast iron housing, set screw locking, and a 2 1/8 in shaft height. It uses a 1/2 in mounting bolt size and is designed for inch-system measurements. This general purpose unit is suitable for moderate load and speed applications.
Where to buy the TIMKEN YAS 1-11/16 SGT pillow block bearing worldwide?
You can source the TIMKEN YAS 1-11/16 SGT pillow block bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring you receive the correct TIMKEN bearing for your application.
How to install the TIMKEN YAS 1-11/16 SGT pillow block bearing?
To install the TIMKEN YAS 1-11/16 SGT, first ensure the shaft is clean and the bore matches 1 11/16 in. Mount the bearing on a flat surface using 1/2 in bolts, then tighten the set screws to lock the bearing onto the shaft. Align the housing properly to avoid misalignment and ensure smooth rotation.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
