TIMKEN 4 Bolt Flange Bearing: Radial Ball, 15/16 in Bore, Cast Iron, Set Screws
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 15/16 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting and uses NLGI #2 equivalent…
SKU 3G-OTH-119573
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 15/16 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting and uses NLGI #2 equivalent lubricant. The bearing has a 3/8 in mounting bolt size and a length of 3 47/64 in, with the manufacturer part number YCJ 15/16 SGT.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 4 Bolt Flange Bearing used for?
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing used to support rotating shafts in industrial equipment such as conveyors, fans, and material handling systems. Its cast iron housing and set screw mounting provide reliable shaft alignment and load support in moderate-duty applications.
What are the specifications of the TIMKEN YCJ 15/16 SGT flange bearing?
The TIMKEN YCJ 15/16 SGT is a 4 bolt flange bearing with a 15/16 in cylindrical bore, cast iron housing, and set screws for shaft mounting. It uses NLGI #2 equivalent lubricant, has a 3/8 in mounting bolt size, and measures 3 47/64 in length. The system of measurement is inch.
Where to buy TIMKEN flange bearings worldwide?
You can source TIMKEN flange bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the TIMKEN YCJ 15/16 SGT or other models.
How to install a TIMKEN 4 bolt flange bearing with set screws?
To install a TIMKEN 4 bolt flange bearing, first clean the shaft and bore. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten the 3/8 in bolts. Then secure the shaft by tightening the set screws evenly against the shaft. Apply NLGI #2 grease per manufacturer guidelines.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
