TIMKEN 4 Bolt Flange Bearing: Radial Ball, 2 3/16 in Bore, Cast Iron, Set Screws
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 2 3/16 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting and uses NLGI #2 equivalent…
SKU 3G-OTH-114955
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 2 3/16 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting and uses NLGI #2 equivalent lubricant. The bearing has a 5/8 in mounting bolt size and is measured in inches, with manufacturer part number YCJ 2-3/16.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 4 Bolt Flange Bearing used for?
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing used to support rotating shafts in industrial machinery. It is suitable for applications requiring a cast iron housing and set screw shaft mounting, such as conveyors, fans, and material handling equipment.
What are the specifications of the TIMKEN YCJ 2-3/16 flange bearing?
The TIMKEN YCJ 2-3/16 is a 4 bolt flange bearing with a 2 3/16 in cylindrical bore, cast iron housing, and set screws. It uses NLGI #2 equivalent lubricant, has a 5/8 in mounting bolt size, and an overall length of 6 23/64 in. The system of measurement is inch.
Where to buy TIMKEN flange bearings worldwide?
3G Electric supplies TIMKEN flange bearings like the YCJ 2-3/16 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this or other industrial bearing solutions.
How to install a TIMKEN 4 bolt flange bearing with set screws?
To install a TIMKEN 4 bolt flange bearing, first align the housing with the mounting surface and secure using 5/8 in bolts. Slide the bearing onto the shaft, then tighten the set screws evenly against the shaft to lock it in place. Ensure the shaft is clean and lubricated per NLGI #2 equivalent grease.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
