TIMKEN Pillow Block Bearing: 1 3/8 in Bore, Cast Iron, Set Screws, 1 13/16 in Shaft Ht
The TIMKEN YAK 1-3/8 SGT is a general purpose pillow block ball bearing with a 1 3/8 in bore, constructed from cast iron and featuring set screws for shaft mounting. It has a maximum speed of 5000 RPM with grease…
SKU 3G-OTH-111827
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN YAK 1-3/8 SGT is a general purpose pillow block ball bearing with a 1 3/8 in bore, constructed from cast iron and featuring set screws for shaft mounting. It has a maximum speed of 5000 RPM with grease lubrication, a shaft height of 1 13/16 in, and a mounting bolt size of 1/2 in, all in the inch system of measurement.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN YAK 1-3/8 SGT pillow block bearing used for?
The TIMKEN YAK 1-3/8 SGT is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery such as conveyors, fans, and pumps. Its cast iron housing and set screw mounting provide reliable shaft retention in moderate-load applications.
What are the specifications of the TIMKEN YAK 1-3/8 SGT pillow block bearing?
The TIMKEN YAK 1-3/8 SGT has a 1 3/8 in bore, cast iron housing, set screw shaft locking, a maximum speed of 5000 RPM with grease lubrication, a shaft height of 1 13/16 in, and a mounting bolt size of 1/2 in. It uses the inch system of measurement.
Where to buy the TIMKEN YAK 1-3/8 SGT pillow block bearing worldwide?
3G Electric supplies the TIMKEN YAK 1-3/8 SGT pillow block bearing worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the TIMKEN YAK 1-3/8 SGT pillow block bearing?
To install the TIMKEN YAK 1-3/8 SGT, first align the bearing unit on a flat mounting surface. Tighten the mounting bolts to the recommended torque for a 1/2 in bolt. Secure the shaft by tightening the set screws evenly. Lubricate with grease per TIMKEN guidelines before operation.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
