TIMKEN Flange Mount Bearing: Radial Ball, 2 1/2 in Bore, Cast Iron, Set Screws
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a cylindrical bore and a 2 1/2 in bore size. It features a cast iron, not split housing with set screws, measures 7 3/8 in in length, and…
SKU 3G-OTH-121246
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a cylindrical bore and a 2 1/2 in bore size. It features a cast iron, not split housing with set screws, measures 7 3/8 in in length, and is lubricated with NLGI 2 Lithium Complex Grease. The mounting bolt size is 5/8 in, and the system of measurement is inch.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN Flange Mount Bearing used for?
The TIMKEN Flange Mount Bearing is used in general purpose industrial applications to support rotating shafts and transmit radial loads. It is commonly found on conveyors, fans, and material handling equipment where a compact, rigid mounting solution is needed.
What are the specifications of the TIMKEN Flange Mount Bearing YCJM 2-1/2?
This TIMKEN bearing has a 2 1/2 in cylindrical bore, a cast iron not-split housing with set screws, and a 7 3/8 in length. It uses NLGI 2 Lithium Complex Grease, requires a 5/8 in mounting bolt, and is inch-system. The manufacturer part number is YCJM 2-1/2.
Where to buy TIMKEN Flange Mount Bearing YCJM 2-1/2 worldwide?
You can source the TIMKEN Flange Mount Bearing YCJM 2-1/2 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring you receive the correct bearing for your application.
How to install a TIMKEN Flange Mount Bearing?
To install, first clean the shaft and bearing bore. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten the set screws evenly against the shaft. Use a torque wrench on the 5/8 in mounting bolts per manufacturer recommendations. Ensure the housing is not split.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
