TIMKEN Flange Mount Bearing: Radial Ball, 2 11/16 in Bore, Cast Iron, Set Screws
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a cylindrical bore and a 2 11/16 in bore size. This inch-system unit features a cast iron, not-split housing, set screw locking, and a 7…
SKU 3G-OTH-106144
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a cylindrical bore and a 2 11/16 in bore size. This inch-system unit features a cast iron, not-split housing, set screw locking, and a 7 3/4 in length. It is pre-lubricated with NLGI 2 Lithium Complex Grease and requires a 3/4 in mounting bolt.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN Flange Mount Bearing YCJM 2-11/16 used for?
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing used in industrial equipment such as conveyors, fans, and material handling systems. Its cast iron housing and set screw locking provide reliable shaft support in moderate-load, inch-system applications.
What are the specifications of the TIMKEN Flange Mount Bearing YCJM 2-11/16?
This bearing has a 2 11/16 in cylindrical bore, a 7 3/4 in length, and a cast iron not-split housing with set screw locking. It is pre-lubricated with NLGI 2 Lithium Complex Grease and requires a 3/4 in mounting bolt. The system of measurement is inch.
Where to buy the TIMKEN Flange Mount Bearing YCJM 2-11/16 worldwide?
3G Electric supplies the TIMKEN Flange Mount Bearing YCJM 2-11/16 worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the TIMKEN Flange Mount Bearing YCJM 2-11/16?
Align the bearing housing with the mounting surface and secure using 3/4 in bolts. Tighten the set screws onto the shaft to lock the bearing in place. Ensure the shaft is clean and lubricated. Follow TIMKEN's generic installation guidelines for proper fit and alignment.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
