TIMKEN Flange Mount Bearing: Radial Ball, 2 15/16 in Bore, Cast Iron, Set Screws
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a cylindrical bore of 2 15/16 inches, featuring a cast iron housing that is not split. It uses set screws for shaft mounting and is…
SKU 3G-OTH-104445
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a cylindrical bore of 2 15/16 inches, featuring a cast iron housing that is not split. It uses set screws for shaft mounting and is lubricated with NLGI 2 lithium complex grease. The mounting bolt size is 3/4 inch, and the system of measurement is inch.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN YCJ 2-15/16 flange mount bearing used for?
The TIMKEN YCJ 2-15/16 is a general purpose flange-mount radial ball bearing used in industrial equipment such as conveyors, fans, and material handling systems. Its cast iron housing and set screw mounting provide reliable shaft support in moderate-load applications.
What are the specifications of the TIMKEN YCJ 2-15/16 flange mount bearing?
The TIMKEN YCJ 2-15/16 has a 2 15/16 in cylindrical bore, cast iron housing (not split), set screw shaft locking, and NLGI 2 lithium complex grease lubrication. Mounting bolt size is 3/4 in, overall length is 7 3/4 in, and it uses inch measurements.
Where to buy the TIMKEN YCJ 2-15/16 flange mount bearing worldwide?
3G Electric supplies the TIMKEN YCJ 2-15/16 flange mount bearing to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this inch-series radial ball bearing.
How to install a TIMKEN flange mount bearing with set screws?
To install a TIMKEN flange mount bearing with set screws, first clean the shaft and bore. Slide the bearing onto the shaft, align the flange bolt holes, then tighten the set screws evenly to the manufacturer's torque specification. Ensure the housing is securely bolted to a flat support surface.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
