TIMKEN Flange Mount Bearing: Radial Ball, 1 15/16 in Bore, Cast Iron, Set Screws
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a cylindrical bore and a 1 15/16 in bore size. It features a cast iron, not-split housing, set screw locking, and is lubricated with NLGI…
SKU 3G-OTH-121209
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a cylindrical bore and a 1 15/16 in bore size. It features a cast iron, not-split housing, set screw locking, and is lubricated with NLGI 2 lithium complex grease. The mounting bolt size is 5/8 in, and the system of measurement is inch.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN Flange Mount Bearing YCJM 1-15/16 used for?
This TIMKEN flange mount bearing is used in general purpose industrial applications requiring radial load support, such as conveyors, fans, and material handling equipment. Its cast iron housing and set screw locking provide reliable shaft mounting in moderate-duty environments.
What are the specifications of the TIMKEN YCJM 1-15/16 bearing?
The TIMKEN YCJM 1-15/16 is a radial ball bearing with a 1 15/16 in cylindrical bore, cast iron not-split housing, set screw locking, and NLGI 2 lithium complex grease lubrication. Mounting bolt size is 5/8 in. It uses inch system measurements.
Where to buy TIMKEN YCJM 1-15/16 flange mount bearing worldwide?
3G Electric supplies the TIMKEN YCJM 1-15/16 flange mount bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install a TIMKEN flange mount bearing with set screws?
To install, clean the shaft and bore, slide the bearing onto the shaft, align the housing with mounting holes, and tighten the set screws evenly against the shaft using a hex key. Ensure the shaft is properly supported and lubricated per manufacturer guidelines.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
