TIMKEN Flange Mount Bearing: Radial Ball, 1 7/16 in Bore, Cast Iron, Set Screws
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 7/16 in cylindrical bore, housed in a cast iron, not-split square flange block. It features set screws for shaft mounting and is…
SKU 3G-OTH-115588
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 7/16 in cylindrical bore, housed in a cast iron, not-split square flange block. It features set screws for shaft mounting and is lubricated with NLGI 2 lithium complex grease. The mounting bolt size is 1/2 in, and the system of measurement is inch.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN Flange Mount Bearing YCJM 1-7/16 used for?
This TIMKEN general purpose flange-mount bearing supports rotating shafts in industrial equipment such as conveyors, fans, and pumps. Its cast iron housing and set-screw locking suit moderate loads and speeds in manufacturing, material handling, and agricultural machinery.
What are the specifications of the TIMKEN YCJM 1-7/16 bearing?
The TIMKEN YCJM 1-7/16 is a radial ball bearing with a 1 7/16 in cylindrical bore, housed in a cast iron, not-split square flange block. It uses set screws for shaft mounting, NLGI 2 lithium complex grease, and a 1/2 in mounting bolt size. System of measurement is inch.
Where to buy TIMKEN YCJM 1-7/16 flange mount bearing worldwide?
3G Electric supplies the TIMKEN YCJM 1-7/16 flange mount bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your facility. Contact us for availability and a quote for your region.
How to install a TIMKEN set-screw flange mount bearing?
Align the bearing unit on the mounting surface and tighten bolts through the flange holes to the specified torque. Slide the shaft into the bore, then tighten the set screws evenly against the shaft using a hex key. Ensure the shaft is clean and lubricated per TIMKEN guidelines.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
