TIMKEN Flange Mount Bearing: Radial Ball, 1 7/16 in Bore, Cast Iron, Set Screws
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 7/16 in cylindrical bore and a not-split cast iron housing. It features set screws for shaft mounting, uses NLGI 2 Lithium Complex…
SKU 3G-OTH-111928
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Flange Mount Bearing is a general purpose radial ball bearing with a 1 7/16 in cylindrical bore and a not-split cast iron housing. It features set screws for shaft mounting, uses NLGI 2 Lithium Complex Grease lubrication, and requires a 1/2 in mounting bolt. This inch-system bearing is identified by manufacturer part number YCJTM 1-7/16.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN Flange Mount Bearing YCJTM 1-7/16 used for?
This general purpose flange-mount bearing supports rotating shafts in industrial equipment such as conveyors, fans, and material handling systems. Its cast iron housing and set-screw locking suit moderate loads and speeds in dry or lightly lubricated environments.
What are the specifications of the TIMKEN YCJTM 1-7/16 bearing?
The TIMKEN YCJTM 1-7/16 has a 1 7/16 in cylindrical bore, cast iron housing with set screws, and a 6 3/4 in length. It uses NLGI 2 Lithium Complex Grease, requires a 1/2 in mounting bolt, and is an inch-system, not-split design.
Where to buy TIMKEN YCJTM 1-7/16 bearings worldwide?
3G Electric supplies TIMKEN YCJTM 1-7/16 bearings worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install a TIMKEN flange mount bearing with set screws?
Clean the shaft and housing bore, then slide the bearing onto the shaft. Tighten the set screws evenly to the manufacturer's torque specification using a hex key. Ensure the shaft rotates freely before securing the mounting bolts.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
