UHMW Polyethylene Bar: 0.25 in Thick, 1 in x 4 ft, Opaque, White
3G Electric supplies the UHMW Polyethylene Bar: 0.25 in Thick, a 1 in x 4 ft, opaque white acrylic adhesive backed UHMW polyethylene bar with a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in (MPN…
SKU 3G-OTH-592455
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
3G Electric supplies the UHMW Polyethylene Bar: 0.25 in Thick, a 1 in x 4 ft, opaque white acrylic adhesive backed UHMW polyethylene bar with a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in (MPN BULK-PS-UHMW-666). We interpret customer demand and deliver this genuine industrial material across 14 departments — with specialist depth in combustion, pumps and controls — ensuring you get the right solution, not just a catalog.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is UHMW Polyethylene Bar with acrylic adhesive used for?
This UHMW Polyethylene Bar (0.25 in thick, 1 in x 4 ft) with acrylic adhesive backing is used for wear strips, chute liners, and conveyor guides in material handling and packaging applications. Its low friction and high impact resistance (16.0 ft-lb/in) protect surfaces from abrasion and reduce noise.
What are the specifications of the UHMW Polyethylene Bar BULK-PS-UHMW-666?
The UHMW Polyethylene Bar (MPN BULK-PS-UHMW-666) is 0.25 in thick, 1 in x 4 ft, opaque white, with acrylic adhesive backing. It has a tensile strength of 4,400 psi and impact strength of 16.0 ft-lb/in. 3G Electric supplies this genuine industrial material across 14 departments.
Where to buy UHMW Polyethylene Bar with acrylic adhesive worldwide?
3G Electric supplies the UHMW Polyethylene Bar (MPN BULK-PS-UHMW-666) worldwide. We handle full logistics, customs clearance, and delivery to your facility. As a global industrial solutions provider, we source this genuine material and ensure you get the right solution for your application.
How to install UHMW Polyethylene Bar with acrylic adhesive backing?
Clean the surface thoroughly, remove the release liner from the acrylic adhesive, and press the UHMW bar firmly into place. For best adhesion, apply pressure evenly and allow 24 hours cure at room temperature. Avoid bending the bar excessively during installation to maintain bond integrity.
UHMW Produk
3G Electric memasok UHMW acrylic adhesive backed uhmw polyethylene sheets & bars. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
