USA INDUSTRIALS Pipe Nipple: 3 in Nominal Pipe Size, 10 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407EZ7) is a Schedule 40, galvanized steel pipe nipple with a 3-inch nominal pipe size and 10-inch length, threaded on both ends with Male NPT x Male NPT connections. It features…
SKU 3G-OTH-464382
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407EZ7) is a Schedule 40, galvanized steel pipe nipple with a 3-inch nominal pipe size and 10-inch length, threaded on both ends with Male NPT x Male NPT connections. It features pre-applied PTFE thread sealant and is rated for a maximum operating pressure of 125 psi at 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 3 in Schedule 40 galvanized pipe nipple used for?
This pipe nipple connects two male NPT threaded fittings in industrial piping systems for water, air, or gas lines. Its galvanized steel construction resists corrosion, and the pre-applied PTFE sealant ensures a leak-tight joint at pressures up to 125 psi at 72°F.
What are the specifications of the USA INDUSTRIALS 3 in pipe nipple?
The USA INDUSTRIALS pipe nipple has a 3 in nominal pipe size, 10 in length, Schedule 40 wall thickness, galvanized steel material, and Male NPT x Male NPT connections. It includes pre-applied PTFE thread sealant and is rated for 125 psi maximum operating pressure at 72°F.
Where to buy a USA INDUSTRIALS 3 in Schedule 40 pipe nipple worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS 3 in Schedule 40 galvanized pipe nipple worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a USA INDUSTRIALS pipe nipple with pre-applied PTFE sealant?
Installation requires standard pipe wrenches; tighten the male NPT threads into matching female fittings by hand, then use a wrench for final snugging. The pre-applied PTFE sealant eliminates the need for additional tape or compound. Avoid over-tightening to prevent thread damage.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
