USA INDUSTRIALS Pipe Nipple: 3 in Nominal Pipe Size, 6 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FA3) is a Schedule 40 galvanized steel nipple with a 3-inch nominal pipe size and 6-inch length, threaded on both ends with Male NPT x Male NPT connections and pre-applied PTFE…
SKU 3G-OTH-464386
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FA3) is a Schedule 40 galvanized steel nipple with a 3-inch nominal pipe size and 6-inch length, threaded on both ends with Male NPT x Male NPT connections and pre-applied PTFE thread sealant. It is rated for a maximum operating pressure of 125 psi at 72°F, providing a ready-to-install solution for industrial piping systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 3-inch Schedule 40 pipe nipple used for?
This galvanized steel pipe nipple connects two male NPT fittings in industrial piping systems for water, air, or gas lines. Its 3-inch nominal size and 6-inch length suit medium-pressure applications up to 125 psi at 72°F, common in plant plumbing and structural supports.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-22448?
The USA INDUSTRIALS pipe nipple has a 3-inch nominal pipe size, 6-inch length, Schedule 40 wall thickness, galvanized steel construction, and Male NPT x Male NPT threaded ends. It includes pre-applied PTFE thread sealant and is rated for 125 psi maximum operating pressure at 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to global customers. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact our team for a quote on the ZUSA-PF-22448 or other industrial piping components.
How to install a galvanized steel pipe nipple with PTFE sealant?
Ensure threads are clean and apply additional PTFE tape if needed. Hand-tighten the nipple into the female fitting, then use a wrench for an additional one to two turns. Do not overtighten to avoid cracking. The pre-applied sealant helps prevent leaks in threaded connections.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
