USA INDUSTRIALS Pipe Nipple: 2 in Nominal Pipe Size, 5 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FE2) is a Schedule 40, galvanized steel nipple with a 2 in nominal pipe size, 5 in length, and Male NPT x Male NPT connections threaded on both ends. It features PTFE thread…
SKU 3G-OTH-464413
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FE2) is a Schedule 40, galvanized steel nipple with a 2 in nominal pipe size, 5 in length, and Male NPT x Male NPT connections threaded on both ends. It features PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
A USA INDUSTRIALS pipe nipple connects two male NPT fittings in industrial piping systems. This 2 in Schedule 40 galvanized steel nipple is used for water, gas, or air lines where corrosion resistance and a leak-tight seal are required.
What are the specifications of the USA INDUSTRIALS pipe nipple?
This USA INDUSTRIALS pipe nipple has a 2 in nominal pipe size, 5 in length, Schedule 40 wall, galvanized steel construction, and Male NPT x Male NPT threads on both ends. It includes PTFE thread sealant and is rated for 125 psi @ 72°F maximum operating pressure.
Where to buy USA INDUSTRIALS pipe nipple worldwide?
3G Electric supplies the USA INDUSTRIALS pipe nipple worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us to order this 2 in Schedule 40 galvanized nipple with PTFE sealant for your industrial piping project.
How to install a USA INDUSTRIALS pipe nipple?
Apply additional PTFE tape or pipe dope to the male NPT threads if needed, then hand-tighten the nipple into the female fitting. Use a wrench for final tightening, but avoid overtightening to prevent thread damage. Ensure the pipe is supported to reduce stress on connections.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
