USA INDUSTRIALS Pipe Nipple: 2 1/2 in Nominal Pipe Size, 10 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FC2) is a Schedule 40, galvanized steel, welded pipe nipple with a 2 1/2 in nominal pipe size and 10 in length. It features Male NPT x Male NPT connections, is threaded on both…
SKU 3G-OTH-464393
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FC2) is a Schedule 40, galvanized steel, welded pipe nipple with a 2 1/2 in nominal pipe size and 10 in length. It features Male NPT x Male NPT connections, is threaded on both ends with PTFE thread sealant, and has a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
A USA INDUSTRIALS pipe nipple connects two male NPT fittings in industrial piping systems for water, air, or gas. This Schedule 40 galvanized steel nipple is used in plumbing, HVAC, and material handling applications where corrosion resistance and a 125 psi @ 72°F rating are required.
What are the specifications of the USA INDUSTRIALS pipe nipple?
The USA INDUSTRIALS pipe nipple has a 2 1/2 in nominal pipe size, 10 in length, Schedule 40 wall, galvanized steel construction, and Male NPT x Male NPT connections. It includes PTFE thread sealant and has a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipple worldwide?
3G Electric supplies the USA INDUSTRIALS pipe nipple worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order this Schedule 40 galvanized steel nipple with PTFE sealant for your piping project.
How to install a USA INDUSTRIALS pipe nipple?
Apply additional PTFE tape or pipe dope to the male NPT threads if needed, then hand-tighten the nipple into the female fitting. Use a wrench on the nipple's hex section for final tightening—avoid over-torquing to prevent thread damage. Ensure the 125 psi @ 72°F rating is not exceeded.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
