USA INDUSTRIALS Pipe Nipple: 2 in Nominal Pipe Size, 72 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel pipe nipple with a 2-inch nominal pipe size, 72-inch length, and Male NPT x Male NPT connections threaded on both ends. It features PTFE thread…
SKU 3G-OTH-464402
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel pipe nipple with a 2-inch nominal pipe size, 72-inch length, and Male NPT x Male NPT connections threaded on both ends. It features PTFE thread sealant and a maximum operating pressure of 125 psi at 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 2 in Schedule 40 galvanized pipe nipple used for?
This pipe nipple connects two male NPT fittings in industrial piping systems for water, air, or low-pressure steam. Its 72-inch length and galvanized steel construction suit structural supports, handrails, or extended runs in plant maintenance, HVAC, and material handling applications.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22430 pipe nipple?
This pipe nipple has a 2-inch nominal pipe size, 72-inch length, Schedule 40 wall thickness, and galvanized steel material. It features Male NPT x Male NPT connections threaded on both ends, PTFE thread sealant, and a maximum operating pressure of 125 psi at 72°F.
Where to buy a USA INDUSTRIALS 2 in x 72 in galvanized pipe nipple worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS ZUSA-PF-22430 pipe nipple worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install a USA INDUSTRIALS Schedule 40 threaded pipe nipple?
Apply additional PTFE tape or pipe dope to the male threads for a leak-free seal. Hand-tighten the nipple into the female fitting, then use wrenches on the nipple's hex section for final tightening—avoid over-torquing to prevent thread damage. Always depressurize the system before installation.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
