USA INDUSTRIALS Pipe Nipple: 2 in Nominal Pipe Size, 10 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (MPN ZUSA-PF-22420) is a Schedule 40, galvanized steel pipe nipple with a 2 in nominal pipe size, 10 in length, and Male NPT x Male NPT connections. It features PTFE thread sealant…
SKU 3G-OTH-464407
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (MPN ZUSA-PF-22420) is a Schedule 40, galvanized steel pipe nipple with a 2 in nominal pipe size, 10 in length, and Male NPT x Male NPT connections. It features PTFE thread sealant applied to both threaded ends and has a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 2 in pipe nipple connects two male NPT threaded fittings in industrial plumbing, compressed air, and water systems. Its galvanized steel resists corrosion, and the PTFE sealant ensures a leak-tight joint at pressures up to 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-22420?
This pipe nipple has a 2 in nominal pipe size, 10 in length, Schedule 40 wall thickness, galvanized steel construction, and Male NPT x Male NPT connections. It includes PTFE thread sealant and is rated for 125 psi @ 72°F maximum operating pressure.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples like the ZUSA-PF-22420 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this Schedule 40 galvanized nipple with PTFE sealant.
How to install a threaded galvanized pipe nipple?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten into the female fitting. Use two wrenches—one on the nipple, one on the fitting—to avoid over-torquing. Do not exceed 125 psi @ 72°F operating pressure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
