USA INDUSTRIALS Pipe Nipple: 2 in Nominal Pipe Size, 8 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FD9, MPN ZUSA-PF-22416) is a Schedule 40 galvanized steel nipple with a 2-inch nominal pipe size, 8-inch length, and Male NPT x Male NPT threaded connections on both ends. It…
SKU 3G-OTH-464410
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FD9, MPN ZUSA-PF-22416) is a Schedule 40 galvanized steel nipple with a 2-inch nominal pipe size, 8-inch length, and Male NPT x Male NPT threaded connections on both ends. It features a PTFE thread sealant and a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 2 in Schedule 40 galvanized pipe nipple used for?
This USA INDUSTRIALS pipe nipple connects two male NPT threaded fittings in industrial piping systems for water, air, or gas lines. Its galvanized steel construction resists corrosion, making it suitable for plumbing, HVAC, and general plant maintenance applications.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22416 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22416 is a 2-inch nominal Schedule 40 galvanized steel pipe nipple, 8 inches long, with Male NPT x Male NPT threads on both ends. It includes PTFE thread sealant and has a maximum operating pressure of 125 psi at 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this ZUSA-PF-22416 nipple.
How to install a threaded galvanized pipe nipple?
Apply PTFE tape or pipe dope to the male threads, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex section for final tightening—avoid over-torquing galvanized steel to prevent thread damage. Always test the joint at operating pressure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
