USA INDUSTRIALS Pipe Nipple: 1 1/2 in Nominal Pipe Size, 10 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FF2) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/2 in nominal pipe size and 10 in length. It features Male NPT x Male NPT threaded connections on both…
SKU 3G-OTH-464423
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FF2) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/2 in nominal pipe size and 10 in length. It features Male NPT x Male NPT threaded connections on both ends, pre-applied with PTFE thread sealant, and is rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
This USA INDUSTRIALS pipe nipple connects two male NPT threaded fittings in industrial piping systems. It is used for water, air, or low-pressure fluid lines where a galvanized steel, Schedule 40 welded construction provides corrosion resistance and durability up to 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22381 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22381 is a 1 1/2 in nominal pipe size, 10 in long, Schedule 40 galvanized steel welded pipe nipple. It has Male NPT x Male NPT connections with pre-applied PTFE thread sealant and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to source this Schedule 40 galvanized steel nipple with PTFE sealant for your piping needs.
How to install a USA INDUSTRIALS galvanized steel pipe nipple?
Install this USA INDUSTRIALS pipe nipple by hand-tightening into female NPT ports, then use wrenches on the nipple's hex section for final torque. The pre-applied PTFE thread sealant eliminates need for additional tape or compound. Avoid over-tightening to prevent stress on the Schedule 40 welded joint.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
