USA INDUSTRIALS Pipe Nipple: 1 1/2 in Nominal Pipe Size, 8 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FF5) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/2 in nominal pipe size and 8 in length. It features Male NPT x Male NPT threaded connections on both…
SKU 3G-OTH-464426
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FF5) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/2 in nominal pipe size and 8 in length. It features Male NPT x Male NPT threaded connections on both ends, pre-applied with PTFE thread sealant, and is rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This pipe nipple connects two male NPT threaded fittings in industrial plumbing, compressed air, and low-pressure fluid systems. Its galvanized steel construction resists corrosion, and the pre-applied PTFE sealant simplifies installation. 3G Electric supplies this component for maintenance and new builds across 14 industrial departments.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-22387?
This Schedule 40 pipe nipple has a 1 1/2 in nominal pipe size, 8 in length, and galvanized steel welded construction. It uses Male NPT x Male NPT connections with pre-applied PTFE thread sealant and is rated for a maximum operating pressure of 125 psi @ 72°F. The manufacturer part number is ZUSA-PF-22387.
Where to buy USA INDUSTRIALS pipe nipple ZUSA-PF-22387 worldwide?
3G Electric sources and delivers the USA INDUSTRIALS pipe nipple ZUSA-PF-22387 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this Schedule 40 galvanized steel nipple with pre-applied PTFE sealant.
How to install a Schedule 40 galvanized pipe nipple with PTFE sealant?
Clean both male NPT threads and the mating female ports. Apply additional PTFE tape or paste if needed, though this nipple comes pre-applied. Hand-tighten, then use a wrench for an additional 1-2 turns. Do not overtighten. 3G Electric can advise on proper selection for your pressure and temperature requirements.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
