USA INDUSTRIALS Pipe Nipple: 1 1/4 in Nominal Pipe Size, 10 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/4 in nominal pipe size and 10 in length. It features Male NPT x Male NPT connections with PTFE thread sealant applied…
SKU 3G-OTH-464440
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/4 in nominal pipe size and 10 in length. It features Male NPT x Male NPT connections with PTFE thread sealant applied, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This pipe nipple connects two male NPT threaded fittings in industrial plumbing, compressed air, or water systems. Its galvanized steel construction resists corrosion, and the PTFE sealant ensures a leak-tight joint at pressures up to 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22402 pipe nipple?
This Schedule 40 pipe nipple has a 1 1/4 in nominal pipe size, 10 in length, and galvanized steel welded construction. It uses Male NPT x Male NPT connections with PTFE thread sealant, rated for 125 psi @ 72°F maximum operating pressure.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 galvanized nipple.
How to install a galvanized steel pipe nipple with PTFE sealant?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex section to achieve a snug seal without over-tightening. Test the joint at operating pressure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
