USA INDUSTRIALS Pipe Nipple: 3/4 in Nominal Pipe Size, 18 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 3/4 in nominal pipe size and 18 in length. It features male NPT threads on both ends with pre-applied PTFE thread sealant…
SKU 3G-OTH-464465
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 3/4 in nominal pipe size and 18 in length. It features male NPT threads on both ends with pre-applied PTFE thread sealant, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This pipe nipple connects two male NPT fittings in plumbing, compressed air, and low-pressure fluid systems. Its galvanized steel construction resists corrosion in industrial environments, and the pre-applied PTFE thread sealant simplifies installation.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22458 pipe nipple?
This Schedule 40 pipe nipple has a 3/4 in nominal pipe size, 18 in length, and galvanized steel welded construction. It features male NPT x male NPT connections with PTFE thread sealant, rated for a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to global customers. As a sourcing partner, we handle logistics, customs clearance, and delivery to your site worldwide. Contact us for pricing and lead time on this Schedule 40 galvanized nipple.
How to install a Schedule 40 threaded pipe nipple with PTFE sealant?
Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1-2 turns. The pre-applied PTFE sealant eliminates the need for tape or paste. Avoid over-tightening to prevent thread damage. Test the joint at operating pressure before full service.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
