USA INDUSTRIALS Pipe Nipple: 1/2 in Nominal Pipe Size, 18 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/2 in nominal pipe size and 18 in length. It features Male NPT x Male NPT connections, threaded on both ends with PTFE…
SKU 3G-OTH-464483
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/2 in nominal pipe size and 18 in length. It features Male NPT x Male NPT connections, threaded on both ends with PTFE thread sealant, and has a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 pipe nipple used for?
This galvanized steel pipe nipple connects two male NPT fittings in plumbing, pneumatic, and low-pressure fluid systems. It is suitable for applications up to 125 psi at 72°F, such as air lines, water supply, and structural supports in industrial plants.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22345 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22345 is a 1/2 in nominal pipe size, 18 in long, Schedule 40, galvanized steel, welded pipe nipple. It has Male NPT x Male NPT connections with PTFE thread sealant and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ZUSA-PF-22345 or other sizes for your project.
How to install a galvanized steel pipe nipple with PTFE sealant?
Apply additional PTFE tape or pipe dope to the male threads for a leak-free seal. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1-2 turns. Do not overtighten, as galvanized steel can crack. Test at operating pressure before full service.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
