USA INDUSTRIALS Pipe Nipple: 1/2 in Nominal Pipe Size, 4 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FP2) is a Schedule 40, galvanized steel nipple with a 1/2 in nominal pipe size and 4 in length, threaded on both ends with Male NPT connections and pre-applied PTFE thread…
SKU 3G-OTH-464489
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FP2) is a Schedule 40, galvanized steel nipple with a 1/2 in nominal pipe size and 4 in length, threaded on both ends with Male NPT connections and pre-applied PTFE thread sealant. It is rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
A USA INDUSTRIALS pipe nipple connects two male threaded fittings in plumbing, compressed air, or low-pressure fluid systems. This 1/2 in Schedule 40 galvanized steel nipple is used for water, gas, or air lines where corrosion resistance and a leak-tight seal are required.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22349 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22349 is a 1/2 in nominal pipe size, 4 in long, Schedule 40 galvanized steel nipple. It has Male NPT threads on both ends with pre-applied PTFE thread sealant and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this ZUSA-PF-22349 Schedule 40 galvanized nipple with PTFE sealant.
How to install a USA INDUSTRIALS galvanized pipe nipple?
Clean both male threads and the female port before installation. Apply additional PTFE tape or pipe dope if needed, though this nipple has pre-applied sealant. Tighten by hand, then use wrenches on the nipple flats—avoid over-tightening to prevent thread damage or leaks.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
