USA INDUSTRIALS Pipe Nipple: 1/2 in Nominal Pipe Size, 1 1/2 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FP9) is a Schedule 40, galvanized steel, welded pipe nipple with a 1/2 in nominal pipe size and 1 1/2 in length. It features Male NPT x Male NPT connections, is threaded on…
SKU 3G-OTH-464494
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FP9) is a Schedule 40, galvanized steel, welded pipe nipple with a 1/2 in nominal pipe size and 1 1/2 in length. It features Male NPT x Male NPT connections, is threaded on both ends with PTFE thread sealant, and has a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This pipe nipple connects two male NPT threaded fittings in low-pressure water, air, or gas lines. Its galvanized steel construction resists corrosion in industrial plumbing, HVAC, and compressed-air systems. Rated for 125 psi at 72°F, it suits general-purpose piping where Schedule 40 strength is adequate.
What are the specifications of the USA INDUSTRIALS 1/2 in pipe nipple?
This USA INDUSTRIALS pipe nipple has a 1/2 in nominal size, 1 1/2 in length, Schedule 40 wall, galvanized steel, welded construction, and Male NPT x Male NPT connections. It includes PTFE thread sealant and has a maximum operating pressure of 125 psi @ 72°F. The MPN is ZUSA-PF-22348.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 galvanized nipple with PTFE sealant.
How to install a threaded galvanized pipe nipple?
Apply pipe joint compound or PTFE tape to the male threads, then hand-tighten into the female fitting. Use two wrenches—one on the nipple, one on the fitting—to avoid over-torquing. Do not exceed 125 psi at 72°F. Ensure threads are clean and free of debris before assembly.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
