USA INDUSTRIALS Pipe Nipple: 1/4 in Nominal Pipe Size, 18 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size and 18 in length. It features male NPT x male NPT connections with PTFE thread sealant applied on…
SKU 3G-OTH-464513
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size and 18 in length. It features male NPT x male NPT connections with PTFE thread sealant applied on both ends, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 1/4 in nominal pipe size, 18 in long galvanized steel nipple connects male NPT threaded fittings in low-pressure plumbing, air, water, and gas lines up to 125 psi @ 72°F. It is commonly used in industrial piping systems where corrosion resistance and a reliable threaded seal are required.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22369 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22369 is a Schedule 40, galvanized steel, welded pipe nipple with 1/4 in nominal size, 18 in length, male NPT x male NPT connections, PTFE thread sealant applied, and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies and delivers USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, no matter the location. Contact us for availability and lead time.
How to install a threaded galvanized pipe nipple with PTFE sealant?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex section to achieve a snug, leak-free joint without overtightening. Do not exceed 125 psi @ 72°F operating pressure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
