USA INDUSTRIALS Pipe Nipple: 1/8 in Nominal Pipe Size, 1 1/2 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/8 in nominal pipe size and 1 1/2 in length. It features male NPT threads on both ends with pre-applied PTFE thread…
SKU 3G-OTH-464529
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/8 in nominal pipe size and 1 1/2 in length. It features male NPT threads on both ends with pre-applied PTFE thread sealant, rated for a maximum operating pressure of 125 psi at 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 1/8 in pipe nipple connects two male NPT threaded fittings in low-pressure galvanized steel piping systems. It is commonly used in air, water, and gas lines where corrosion resistance and a leak-free seal are required, with a maximum operating pressure of 125 psi at 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22380 pipe nipple?
This pipe nipple has a 1/8 in nominal pipe size, 1 1/2 in length, Schedule 40 wall thickness, and is made of galvanized steel with a welded construction. It features male NPT threads on both ends with pre-applied PTFE thread sealant, rated for 125 psi at 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery for this Schedule 40 galvanized steel nipple (MPN ZUSA-PF-22380) and thousands of other genuine industrial parts.
How to install a Schedule 40 galvanized pipe nipple with PTFE sealant?
Hand-tighten the nipple into the female NPT port, then use a wrench for an additional 1-2 turns. The pre-applied PTFE sealant eliminates the need for tape or dope. Do not overtighten, as galvanized steel can crack. Maximum torque should not exceed the 125 psi @ 72°F rating.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
